I have a 2014 Ford Focus Titanium. The radio does not work. The car was stolen, the wires in the trunk were cut and new wires were spliced and put in. The radio worked before the car was stolen. The screen works, you can click on different radio stations, see the time and temperature, but no sound comes out.

Top Answer. The display in Your 2010 Ford Fusion is controlled by something Ford calls the APiM which stands for Accessory Protocol Interface Module. This is a controller that is separate from the head unit and is in control of interfacing with all Audio sources as well as CAN-bus systems. Multiple owners have complained about the display not
Turn off the vehicle and remove the key from the ignition. Locate the display screen’s power button and hold it down for at least 10 seconds. Release the power button and wait for the display screen to turn off. Turn on the vehicle and check if the display screen is working properly.
pull the stero and check for a power with the key off and 2 powers with the key on. and make sure that there is a ground there. if all the signals are there then get a radio. Rims, fog light conversion, Interrior lighting recolor from starfuryt. Save Share.
5) Remove the two screws holding the plastic that surrounds the steering wheel. 6) Lower the steering wheel all the way and remove this plastic. 7) Remove the vents above the top of the radio dash unit. 8) Remove the two screws holding the radio in place. 9) Starting from the bottom begin to pull the dash unit out.
So one day the radio stopped working i switched it to another the same problem, so i checked and changed the fuse, same problem. Next i checked the voltages and continuity from the wires seem ok e.g. 12v. I thought maybe im really unlucky so i used a cassette radio, and nice the cassete
To do an update for touchscreen SYNC press the "seek" button (under "tune+" button) and radio power button at the same time. After 5 seconds the screen will go black and the music comes on! After 1 -2 minutes screen comes back to life and everything back to working order. No trip to the garage needed. Quote. 1. Press the H button until the hour begins flashing on. display. Press this button a second time and the. minutes begin flashing on display. 3. Press the H button again until the clock display. stops flashing to set the currently displayed time; the current time displayed is automatically set.
2014. When the radio is not working in Your 2014 Ford Focus SE the first thing to always check is the fuse for it. When the fuse to this gets damaged or blows that will mean that the radio will not turn on at all and You will need to replace the fuse to get it working again. If that does not solve the problem then the next thing to check is the
meoXGT.
  • 8eeph717aa.pages.dev/45
  • 8eeph717aa.pages.dev/358
  • 8eeph717aa.pages.dev/544
  • 8eeph717aa.pages.dev/610
  • 8eeph717aa.pages.dev/90
  • 8eeph717aa.pages.dev/732
  • 8eeph717aa.pages.dev/277
  • 8eeph717aa.pages.dev/455
  • 8eeph717aa.pages.dev/531
  • 8eeph717aa.pages.dev/172
  • 8eeph717aa.pages.dev/964
  • 8eeph717aa.pages.dev/773
  • 8eeph717aa.pages.dev/721
  • 8eeph717aa.pages.dev/218
  • 8eeph717aa.pages.dev/261

    • ford focus radio screen not working